Belt Type Microwave Food Fruit Chemical Dryer

Description
Belt dryer for Seaweed is specially designed for drying different shapes of root vegetables and leafy vegetables. This drying machine has three-layer and five-layer structure, each layer can be independently adjusted the drying temperature according to the characteristics of the materials.
The working principle of this multilayer conveyor dryer shows as follows: the material is limit controlled by the hopper and is evenly spread on the mesh belt. The materials are driven by the motor to the top layer, then perform uniform motion in the multilayer belt dryer and conduct downward movement layer by layer. Cold air enters from the two axial flow fans, after ballasting via baffle plate, it will flows from bottom to top. There is equipped with a heater under the mesh belt at each layer. The cold air is constantly gradient heated, and then through the material layer. It will conduct mass transfer and heat transfer with the material layer, so that the moisture contained in the material can be rapidly vaporized and evaporated. When the cold air gets to the top layer, it has become saturated moist air, and will be discharged outdoors under the action of exhaust fan.

Features：

In mesh belt dryer system, the following data can be special set and adjusted in order to achieve best drying effect: heating temperature,air flow,staying time.Agility specified : we can add mesh belt washing system and product cooling system in mesh belt dryer system.Agility operating: after conveying on mesh belt, wet material is dried in a total sealed chamber during whole drying process. Working condition is good because the system do not have powder leaking out side. When wet material loaded in conveying belt, relative position between each single material is quite stable.